This fine example of a Ceramic tiled bathroom is from a house in the city of Colchester. The property had just changed hands and the new owner didn’t know how to restore the tile, grout, and silicone to their standards. It was clear that the tile and grout had been neglected by the previous owner and mould had started to form.
Refreshing stained tile and grout is such a quick thing to do and gives maximum benefit, especially if your selling a property as it will help achieve more interest. So, it always surprises me that many sellers don’t chose to do this before putting their house on the market.
Cleaning a Ceramic Bathroom Tiles
Work started with a deep clean of the grout lines with a generous application of Tile Doctor Duo Clean which is a fast and effective grout cleaner and mould remover. This product is designed for this purpose and comes with a trigger attachment so it can easily be sprayed onto the wall. The solution was then left for five minutes before being scrubbed into the wall tile and grout with a scrubbing brush. This action brought out a lot of dirt and staining from the grout which was then rinsed off.
After reviewing my handywork I decided more work was needed to the grout so I followed this up with an application of Tile Doctor Oxy-Gel. This is a gel cleaner that sticks well to vertical surfaces allowing for longer dwell times. After ten minutes it was worked into the grout as before and then rinsed off.
The Tile and Grout was now as clean as it could be but there were some deep-seated stains in the grout that simply couldn’t be removed. However, I always knew this could be the case and had already agreed I would apply a grout colourant if this proved to be the case.
Grout Colouring Ceramic Bath Tiles
Before applying the colourant though I needed to prepare the grout to achieve a stronger bond with the colourant. I did this with another Tile Doctor product called Acid Gel which is applied as before. This etches the grout at a microscopic level and being acidic further cleans the surface by removing limescale deposits.
I then set about stripping out the silicone mastic sealant between the bathtub and wall tiles with a sharp knife; the sealant was heavily stained almost black in places so very much in need of replacement. Once all the rubbish was swept out, I dried any remaining dampness from the grout and tiles.
This left the grout ready to be recoloured. I did this over the course of a few hours, using a White colourant from the Tile Doctor Grout Colourant range. White is just one of eleven colours available in the range and was chosen in this case to give the grout a really fresh look and to blend in with the Ceramic tiles. The Grout Colourant not only colours the grout joints – it also seals and rejuvenates them leaving it looking new.
Once the restoration was finished, I filled the bath with water and resealed the shower base with fresh silicone mastic again in White to match the tile and grout. This last step finished the renovation leaving it looking like a new installation.
The Customer was amazed by the transformation of their bathroom and left the following five-star review.
Did you know Tile Doctors have the right equipment and products for renovating external installations as well as internal. So if you have a driveway or patio that needs deep cleaning and expert attention get in touch on 0345 512 01222.